Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Burnsville?
Spring replacement in Burnsville typically costs $180 – $340 for one torsion spring, and most doors use a matched pair, so a full pair usually runs about twice that. The written estimate we give you after looking at your door sets the final price, and estimates are free. Call (855) 560-7429 and you’ll get a real number, not a shrug.
That range covers the spring, the labor, and the safety check that should always come with the job. It doesn’t cover cables or rollers that failed alongside the spring, which is common on an older door. We’ll tell you what we find before we start, so there are no surprises on the invoice.
Key Takeaways
- One spring: $180 – $340. A matched pair: roughly double that.
- Estimates are free, and we quote before we touch anything.
- Springs are the most dangerous part of a garage door system. This isn’t a DIY fix.
- Same-day service is available for doors that are stuck or trapping a car.
- We work on the brand you already have, from LiftMaster and Chamberlain openers to Clopay, Amarr, Wayne Dalton, Craftsman, Genie, and Raynor doors.
A broken spring announces itself: a loud bang from the garage, then a door that won’t lift or a car stuck inside. If that’s where you are right now, skip ahead and call (855) 560-7429. We treat spring repair as a core specialty here at Burnsville Garage Door Repair Co, not a side job we squeeze in between other work.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work and the repairs that often come with it break down for a Burnsville home. These are typical estimated ranges, not a fixed quote.
| Job | Typical Estimated Cost |
|---|---|
| Spring repair or replacement (one spring) | $180 – $340 |
| Matched pair (both springs replaced together) | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
| General garage door repair | $150 – $600 |
Why the spread? A single spring on a lighter door sits near the low end. Two springs on a double-car door with heavy insulated panels push toward the top. Where your door lands depends on the spring type, the door’s weight, and whether anything else gave out when the spring let go. That last part matters more than people expect. A spring under tension is holding back a lot of weight, and when it snaps, the sudden release can knock a cable loose or bend a track slightly. A technician who checks the whole system catches that on the first visit instead of leaving you to discover it the next morning.
If your door needs more than springs, our spring replacement page covers the process in more detail, and we handle cable, track, and roller work in the same visit so you’re not scheduling a second appointment for something we could have fixed the first time.
What Affects Spring Replacement Pricing in Burnsville
No two doors price out the same, and it’s usually one of these factors that moves the number.
- One spring or two. Lighter single-car doors often run one spring. Heavier double doors usually run a matched pair, sometimes more than two on larger panels. Since springs are replaced together, a pair costs about double a single. We’ll tell you which setup you have before quoting.
- Spring type and size. Torsion springs mounted above the door and extension springs along the sides are different jobs with different parts. So are high-cycle springs built for doors that get used many times a day. The right spring for your door’s weight and cycle count changes the part cost.
- Door weight and insulation. A basic non-insulated door weighs less than a steel-back insulated door, and that weight stress shows up in the spring spec. Insulated doors, which more Burnsville homeowners choose for the cold months, generally need heavier-rated springs.
- Condition of cables, drums, and bearings. If the cables are frayed or the bearings are dry and grinding, replacing the spring alone leaves a weak link in the system. We quote those separately so you can decide.
- Season and demand. Spring failures cluster in the temperature swings of early spring and late fall, when a cold snap follows a warm stretch. Book during a quiet stretch and scheduling is easier. During a cold-weather rush, the price range doesn’t change, but getting on the schedule fast matters more.
- Access and door condition. A clean, unobstructed garage makes the job quicker. A door that’s been binding for months, or a garage packed to the rafters, takes longer and can push the labor side of the estimate up.
One thing that does not change the price: the brand. Whether your door is a Clopay, an Amarr, a Wayne Dalton, a Raynor, or a Craftsman, the spring work is priced the same way. What changes is how fast we diagnose it. Familiarity with these eight brands means fewer return trips and the right part the first time.
How to Save on Spring Replacement
You can’t make a broken spring cheaper by waiting, and you shouldn’t try. But a few things keep the total down.
- Get the free estimate first. A number before the work starts is the single biggest way to avoid paying for something you didn’t need. Call (855) 560-7429 and we’ll quote it.
- Replace the pair together. If one spring of a matched pair broke, the other is the same age and under the same load. Replacing both in one visit costs less than two separate calls, and you avoid a second failure weeks later.
- Fix a binding door early. A door that drags, jerks, or sounds rough is wearing its springs faster. A small adjustment now beats a spring replacement later.
- Ask about high-cycle springs. If your household opens the door many times a day, a spring rated for more cycles costs more upfront and less over the years. Worth asking about, not something we’ll push.
- Don’t skip the safety check. A cheap spring swap that ignores a frayed cable can turn into a bigger repair. The check is part of the job, not an add-on.
- Bundle the small stuff. If your rollers are worn or a track is out of line, doing it in the same visit saves a trip charge and a second appointment.
We keep estimates free and pricing upfront. Emergency service, not emergency pricing: if your door fails and you need us fast, the availability is the same, and we still quote before we start. Garage door repair and spring work are what we do, and that’s all we do.
Why Spring Replacement Is Not a DIY Job
Springs store a large amount of energy, and that energy is released the moment the spring fails or is handled wrong. A torsion spring under load can cause serious injury, and the tools needed to wind and unwind one safely aren’t something most homeowners have. This is the one part of garage door work where we tell people plainly: leave it to a trained professional.
What you can safely do is check for the warning signs and call before it gets worse:
- A gap in the coil, or two separated coils on a torsion spring
- A door that lifts a few inches and stops, or won’t lift at all
- A loud bang from the garage with no obvious cause
- A door that feels extremely heavy when you try to lift it by hand
- Visible fraying on the cables
If you spot any of these, keep the door closed, don’t force it, and call (855) 560-7429. Our technicians have up to 9 years of experience with exactly this kind of failure. They’ll tell you what’s wrong and what it costs to fix, and the local pro who does the work is licensed and insured as their state requires.
How a Spring Replacement Visit Usually Goes
Most spring jobs are done in a single visit. Here’s the general flow so you know what to expect.
- We look at the whole system. Spring type, door weight, cable condition, track alignment. The estimate comes from what we actually see.
- We quote before we start. A written estimate, the price you’ll pay, no additions without your okay.
- We release the tension safely. Winding bars and the right technique, which is the part that keeps everyone safe.
- We install the new spring or pair. Correctly rated for your door’s weight and cycle count.
- We test the door and the balance. A properly balanced door stays put halfway up. We adjust the opener if it needs it.
- We leave it working. That’s the goal every time we pull up: back on track today, working before we leave.
If you’re also dealing with an opener that’s acting up, we handle LiftMaster, Chamberlain, Genie, and Craftsman units along with the rest. Opener repair runs $120 – $320 and installation runs $250 – $550. We work on the brand you already have, which means the right part for your specific system and fewer return visits.
Spring Repair vs. New Door: Which Makes Sense?
Usually, spring repair. A door in good shape with a failed spring gets a new spring and keeps going. A new door makes sense when the panels are rusted through, the door has structural damage, or it’s simply at the end of its life. New door installation runs $700 – $2200, and we handle the full job from measurement to install, so you don’t need a second contractor.
If you’re not sure which way to go, that’s part of the estimate. We’ll tell you straight whether repairing it is the honest answer or whether you’re throwing money at a door that’s done.
FAQs – Spring Replacement Cost
How much does garage door spring replacement cost in Burnsville?
Spring replacement in Burnsville typically costs $180 – $340 for one spring, and a matched pair runs about twice that. The written estimate sets the final price. Call (855) 560-7429 for a free quote on your door.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door itself is sound. A spring replacement at $180 – $340 is far less than a new door at $700 – $2200. If the panels or structure are failing, replacement is the better value. Call (855) 560-7429 and we’ll give you an honest read.
Can you replace a broken spring the same day?
Yes, same-day service is available for spring failures, since a stuck door often traps a car. We respond fast and quote before starting. Call (855) 560-7429 to schedule.
Do I need to replace both springs if only one breaks?
We recommend replacing the pair, because the second spring is the same age and under the same load. A pair costs about twice one spring, but doing both in one visit usually costs less than two separate calls. Call (855) 560-7429 and we’ll walk you through it.
What else might I need to pay for during a spring replacement?
If your cables, rollers, or tracks are worn, those add to the bill: cable repair is $130 – $250, roller replacement $110 – $220, and track realignment $120 – $240. We quote each separately, and you decide. Call (855) 560-7429 for the full picture.
Where can I get a free estimate in Burnsville?
Call Burnsville Garage Door Repair Co at (855) 560-7429. Estimates are free, pricing is upfront, and we’ll tell you what the job actually needs before we start. Whether it’s a spring, a cable, or an opener, we work on the brand you already have and get it working before we leave.
Pricing reflects the Burnsville market as of 2026. Burnsville Garage Door Repair Co offers free estimates – call (855) 560-7429.
Written by the team at Burnsville Garage Door Repair Co.
What Our Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Justin Wong"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Robert Miller"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Allen Kim