Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Edina
If your Edina garage door has finally given out after decades of service, you’re probably weighing a repair against a full replacement. New garage door installation in Edina typically runs $700 – $2,200, and the exact figure comes down to door size, material and whether your opening is an original single-car build. We know Edina’s older rambler and split-level garages well, and we plan around the tight clearances those homes were built with. Call (855) 560-7429 for a free estimate.
Why Edina Homeowners Call Burnsville Garage Door Repair Co for Garage Door Installation
Edina homeowners tend to want the same things from a garage door company: someone who shows up when scheduled, understands what’s actually inside an older garage, and doesn’t try to sell a door you don’t need. We specialize only in garage doors, so the person measuring your opening isn’t a generalist squeezing in a side job. Our technicians have up to 9 years of experience, and they work on the brands most Edina homes already have, from Clopay and Amarr doors to LiftMaster and Chamberlain openers.
We serve Edina and the surrounding west-metro communities, and we treat the area as home ground, not a far-flung outskirt. When you call, we book a free measure and give you a written price before any work starts. If you’re comparing bids, we’re happy to walk you through the trade-offs between a standard sectional door and a custom fit for an odd-sized opening.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Edina
Our garage door installation work in Edina covers the range of jobs older homes actually need, from a straightforward single-door swap to a custom fabrication for a non-standard opening. Here’s how each piece usually goes.
New Door Installation
A full new door installation in Edina starts with a careful measure, because so many garages here were sized for one narrower car. We confirm the headroom, then match you to a sectional door that fits the existing opening rather than forcing the opening to fit the door. Old openers often need their rail and photo-eye sensors repositioned for the new door’s travel.
Single Car Door
Single car doors are the most common replacement in Edina’s 1950s and 1960s ramblers, and the most common headache too. The original opening may be narrower and shallower than today’s standard, so the door has to be sized to the space. This is a job where a precise measure matters more than brand names.
Double Car Door
Double car doors serve the larger garages in Edina’s 1980s two-stories and expanded ramblers, where there’s more room to work with. A wider door puts more load on the springs and tracks, so we check balance and alignment carefully before calling it done. If you’ve added a second vehicle and widened your opening, we can talk through the options.
Custom Garage Door
Custom garage doors fit the Edina homes where nothing standard works: an unusual width, a low ceiling, or a look the homeowner wants to keep consistent with a Mid-Century facade. We measure the actual opening and headroom, then spec the door and hardware to match. Custom work takes a little longer to order, but it solves problems a stock door can’t.
Trusted Brands We Service in Edina
We work with the brands you’re most likely to find in Edina garages: LiftMaster and Chamberlain openers, Genie on some of the older units, and Clopay and Amarr doors. That familiarity means we diagnose faster and know which parts fit which system, so there are fewer return visits. We don’t keep a warehouse of parts, but we know what your specific door and opener need and can get it ordered.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Edina Homes
Edina’s housing stock and weather create a few recurring problems that show up in installation and replacement jobs again and again.
- Failing extension springs on legacy single doors. Original extension springs on 1950s – 60s single doors snap after decades of freeze-thaw cycling, and standard replacement springs often won’t fit the shallow headroom these garages have. We size the hardware to the actual space.
- Warped and delaminated wood or early steel doors. Road-salt spray and heavy spring melt work on older panels until they bind and the track alignment drifts. If the panels are too far gone, replacement makes more sense than chasing repairs.
- Legacy openers straining against unbalanced doors. Craftsman and Genie units from decades back fight fatigued springs, which wears the opener rail and knocks the photo-eye sensors out of alignment. A new door plus a fresh opener often fixes both problems at once.
- Low headroom in original single-car garages. In Edina’s 55436 ramblers, the original dimensions often leave too little headroom for a standard torsion spring and track radius, so installers routinely cut down springs or spec low-headroom hardware kits. That constraint is rare in newer metro suburbs, and it’s the reason a precise measure comes before any order.
Pricing for Garage Door Installation in Edina, MN
A typical new door installation in Edina runs $700 – $2,200, and the written estimate you get after the measure sets the final price. We quote and agree the number before any work starts, so you’re not guessing at the invoice. Your opening size, door material, and any hardware the old garage forces (like low-headroom kits) all move the figure within that range. Estimates are free.
| Service | Typical estimated range in Edina |
|---|---|
| New Door Installation | $700 – $2,200 |
| Single Car Door | $700 – $1,500 |
| Double Car Door | $1,200 – $2,200 |
| Opener Installation | $250 – $550 |
| Spring Repair (one spring) | $180 – $340 |
| Panel Replacement | $250 – $500 |
If your springs are the only problem and the door itself has life left, repair can be the smarter spend. A matched pair of springs is usually replaced together, so a pair costs about twice the one-spring range. Call (855) 560-7429 for an exact quote.
We Also Serve Cities Near Edina
We also work in Hopkins, Eden Prairie, Bloomington and Richfield, along with the rest of the west metro. If you’re just outside Edina and need a garage door measured or replaced, we can help. Call and tell us where you are, and we’ll set up a free estimate.
Serving Edina, MN – Our Local Coverage Area
We serve Edina and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Edina
Yes, in most cases. The original single-car garages here often don’t have enough headroom for a standard torsion spring and track radius, so installers cut down the springs or use low-headroom hardware kits to make it fit. A proper measure tells us which route your garage needs before we order anything.
Replace it if the panels are warped, delaminated, or the springs won’t fit anymore; repair it if the door is sound and only the hardware has failed. Decades of freeze-thaw and road-salt spray usually push older wood doors past the point where repairs pay off. Call (855) 560-7429 for a free assessment and a firm number either way.
The most common are LiftMaster and Chamberlain for openers and Clopay and Amarr for doors, with Genie showing up on older units. We work on the brand you already have rather than pushing a switch. That means the right part for your specific system and fewer return visits.
Because Twin Cities winters bring repeated freeze-thaw cycles plus road-salt spray, and heavy spring melt and summer storms test the seals and panel integrity. That combination wears bottom seals faster than a milder climate would. Call for a free estimate if your seal is letting in water or cold air.
A single car door is a standard-width door sized to a common one-car opening; a custom door is built to your actual opening when nothing standard fits. In older ramblers with narrow or low openings, custom is sometimes the only way to keep the original garage footprint. Call (855) 560-7429 and we’ll tell you which one your garage needs.
If your Edina garage door is past its service life or you’re weighing a repair against a replacement, call (855) 560-7429 for a free estimate. We’ll measure the opening, explain the options, and give you a written price before any work starts.
Written by the team at Burnsville Garage Door Repair Co.